5 axis CNC Kit -2 / TB6560 5 axis Stepper Motor Driver + Digital Display Panel + Handle Controller

5 axis CNC Kit -2 / TB6560 5 axis Stepper Motor Driver 1.High quality 2.Factory price 3.100% Brand new 4.OEM service

5 axis CNC Kit -2 / TB6560 5 axis Stepper Motor Driver + Digital Display Panel + Handle Controller     

Features:

Toshiba TB6560AHQ chi

p - High power, maximum 3.5A drive current chipset !

1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!

Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors

Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !

On board current switching - Power output can be set according to specific user requirement !

Full closed-type optical isolation to protect the user's computer and equipment

Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)

4 channel inputs interface- Can be used for XYZ limit and emergency stop !

Professional design - Two stage signal processing with super anti-jamming !

Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !

Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !

Universal architecture - Supports most parallel software MACH3,KCAM4 etc!

Dip settings:

Current Setting	1	2	Decay Mode Settings	3	4	MicroStep Settings	5	6
100%	ON	ON	FAST	ON	ON	1	ON	ON
75%	ON	OFF	25%	ON	OFF	1/2	ON	OFF
50%	OFF	ON	50%	OFF	ON	1/8	OFF	ON
25%	OFF	OFF	SLOW	OFF	OFF	1/16	OFF	OFF

 

Further Details:

 

* This driver and the steppers get power from the same unit, they don't require separate power source.

* Voltage Selection:

12-16V DC power supply for Nema 17 stepper motors

16-24V DC power supply for Nema 23 stepper motors

24-36V DC power supply for Nema 34 stepper motors

Important: High voltage will burn up the chips or stepper motors!!!

The power output of 12V shall be applied to the radiator fan of 12V

Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

Suitable for unipolar or bipolar stepper motors.

Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

Specification:

Electrical properties (ambient temperature Tj = 25 Celsius pm):
Input Power	12-36V DC power supply
Stepper motor drive current	1.5A - 3A/phase
Drive type	Double-pole constant flow PWM actuation output
Compatible Stepper motors	2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

5 Axis Digital Display Panel

Setting an example: If the X-axis 0. 1MM pulse required is equal 10, Y-axis 0. 1MM pulse required is equal 20, Z axis 0. 1MM pulse volume equal to the required 30. 1: Press Setup (STP) button, display blinking, into the set state 2: X-axis under the key 10 to 0, X-axis digital value equal to 10 3: Press the Y axis to 0 under the key 20, Y-axis digital value equal to 20 3: Z-axis to 0 by the next key 30, Z-axis digital value equal to 30 4: Press Setup (STP) key, display stops flashing to exit the setting mode 5: Setting success. Will automatically set the parameters permanently stored until the next set will be refreshed after the success of setting parameters

 

Package include:

1 * TB6560 5 axis Stepper Motor Driver 1.5A-3A

1* Handle Controller

1*5 Axis Digital Display Panel1 * CD software(English Manual & Mach3 demo version) 6 * Wire connectors 1 * DB25 parallel cable

 

 

5 axis CNC Kit -2 / TB6560 5 axis Stepper Motor Driver + Digital Display Panel + Handle Controller